General Placement and Set-up Tips
» Place the subwoofer, powered speaker or amplifier at its intended location.
» Try to maintain line-of-sight (no walls or solid barriers) between the transmitter
and receiver for best results.
» Receiver should be within 130 feet of transmitter for best results.
» Avoid placing the transmitter next to devices that could create signal interference, such as mobile
phones, baby monitors, RF wireless phones and Wi-Fi routers.
Connecting the Wireless Transmitter to an AV processor
1. Connect the mono RCA cable to the subwoofer out or LFE channel of the AVR or pre-amp
processor to the R/LFE input on the wireless transmitter.
2. Connect the USB A to Micro B cable to the wireless transmitter and the included 5 VDC power
supply. You can also use an available USB charging port with an output of at least 5V @ 0.5A
3. If using the 5 VDC power supply, connect to nearby power outlet.
Connecting the Wireless Transmitter to a 2-channel stereo pre-amp
1. Connect a stereo RCA cable to the L and R line level pre-outs of the 2-channel stereo
pre-amp and to L and R input on the wireless transmitter. – CABLE NOT SUPPLIED
2. Connect the USB A to Micro B cable to the wireless transmitter and the included 5 VDC
power supply. You can also use an available USB charging port with an output of at
least 5V @0.5A
3. If using the 5 VDC power supply, connect to nearby power outlet.
CENTER
REAR
FRONT
SUBWOOFER
(SUB1)
LINE LEVEL OUTPUTS
INPUT
OUTPUT
A
ud
i
o
I
n
L
P
ower
P
air
R
RECEIVER/PREAMP
A
ud
i
o
I
n
(Transmitter)
L
P
ower
P
air
R
LINE LEVEL OUTPUTS
REAR
FRONT
R
L
RECEIVER/PREAMP
A
ud
i
o
I
n
(Transmitter)
L
P
ower
P
air
R
