Connecting the Wireless Receiver to Power Amplifiers or Powered
Speakers
1. For 2-channel applications connect the stereo RCA cable to the L and R inputs on the
stereo amplifier or powered speaker inputs and to the L and R outputs on the wireless
receiver - CABLE NOT INCLUDED
2. Connect the USB A to Micro B cable to the wireless receiver and the 5 VDC power supply.
3. Connect the 5 VDC power supply to a nearby outlet.
Pairing the Transmitter and Receiver
1. The transmitter and receiver are synched at the time of manufacture and will pair
automatically when connected and powered on.
2. Successful pairing will be indicated by a steady blue light on the transmitter and receiver.
3. A slow flashing light indicates the units are not paired. To re-pair the units, perform the
following actions:
» Once your transmitter and your receiver are
connected and powered on, press and hold the
PAIR button located on the back of the transmitter
until the blue LED light located on the top of the
unit flashes quickly.
» Within 30 seconds, press and hold the PAIR button located on the back of the receiver.
» When your transmitter and receiver are paired, the wireless status lights on the top of
both units will turn solid blue.
» Your SVS SoundPath Tri-Band Wireless Audio Adapter transmitter and receiver are now
set up and ready to use.
LINE LEVEL INPUTS
SPEAKER LEVEL
OUTPUTS
R
L
TO
SPEAKERS
POWER AMPLIFIER
A
ud
i
o
Out
(Receiver)
L
P
ower
P
air
R
INPUT
OUTPUT
A
ud
i
o
I
n
L
P
ower
P
air
R
