SVS-Vistek CameraLink svs11002, User Manual

Page: 43 / 47

Users Manual Area Scan Cameras svs11002 and svs16000 Page 43
Following values are true:
0 x 00: free running mode, no binning
0 x 01: triggered mode, exposure time via external signal (Exsync), no binning
0 x 02: triggered mode, exposure time via Micro controller
0 x 03: reserved
0 x 04: free running mode, horizontal binning only;
0 x 05: triggered Mode, exposure time via external Exsync, horizontal binning only
0 x 06: triggered mode, exposure time via Micro controller, horizontal binning only
0 x 07: reserved
0 x 08: free running mode, vertical binning only for 2 lines;
0 x 09: triggered mode, exposure time via external Exsync, vertical binning only for
2 lines
0 x 0A: triggered mode, exposure time via Microcontroller, vertical binning only for 2
lines
0 x 0B: reserved
0 x 0C: free running mode, horizontal and vertical binning for 2 lines
0 x 0D: triggered mode, exposure time via external Exsync horizontal and vertical
binning for 2 lines
0 x 0E: triggered mode, exposure time via Micro controller, horizontal and vertical
binning for 2 lines
0 x 0F: reserved
0 x 10 – 0 x 19: Do not use
0 x 1B: Do not use
0 x 1C: Do not use
0 x 1D: Do not use
0 x 1E: Do not use
0 x 1F: Do not use
It is further possible to configure Exsync by using bit 5. Result is a change from the differential
trigger to the TTL input trigger.
Overview over mode bits
Bit 7 6 5 4 3 2 1 0
= 1
Slow
Mode Reserved
always 0 Exsync via
TTL-input Reserved
always 0 2 x 2
binning 2 x 2
binning triggered mode,
exposure time via
Micro controller triggered mode
exposure time via
Exsync pulsewidth
For PIV mode of all cameras using 14 bit ADC ( 12 bit output):
activate by bit 6:
Mode-byte bit 6: PIV Mode enable
1 = PIV Mode on
0 = PIV Mode off (normal operation)