SVP UDT-4K, Manual

Page: 61 / 193

UDT-4K UHD HEVC Digital Camera Transmitter
MANUAL V0
61
4.6.2 RF Menu
By using the Up, Down arrow keys, select the RF option and press the OK
key.
In this section, we make a selection of the modulation we are going to use.
It permits 4 options. (The S2 and the S are optional).
Figure 4.26: RF menu
4.6.2.1 DVB-T2
Here we can change different parameters of the T2 modulation. Some of
these parameters affect the output bitrate of the modulator and the
characteristics of the link: more robustness or more bitrate.
Figure 4.27: DVB-T2 Menu
Line nº Function
1
Frequency (editable parameter):
Select the frequency at which the signal is going to be transmitted.
To establish the frequency value first, press the OK button and then,
with the Up, Down arrow buttons select the desired value. To save
the introduced value, press the OK button.
DVB-T2
F: 2.300,00MHz
Power: PA(High) <>
Bandwidth:8MHz <
DVB-T2
Modul: 16 QAM <>
LDPC Fec: 2/3 <>
GI: 1/32 >
DVB-T2
FFT: 4K <
Time Int: 80 (34)
DC by RF: Off >