SVP UDT-4K, Manual

Page: 26 / 193

UDT-4K UHD HEVC Digital Camera Transmitter
MANUAL V0
26
Chapter 4: Transmitter Operation and Menus
This section provides the user all the necessary information to control,
configure and operate the equipment properly.
4.1 Display
To turn the equipment on and off, press ON/OFF button.
When a video, Audio or data input has been selected, a character connected
to this input is displayed on the main screen.
Next, the main screen of the UDT-4K_HEVC Transmitter is shown.
Figure 4.1: UDT-4K front panel / Main screen explanation
Once an option has been selected, the main screen appears and these
parameters are displayed:
• Frequency (MHz)
• Transmission Standard (DVB-T2, DVB-T, DVB-S2, DVB-S,…)
• Output power (dBm). 3 options available:

Variable power range from -5 to 20 dBm (DVB-T/T2) and from-20
to 5 dBm (DVB-S2/S).

High power which means that the output power is 20 dBm.

Low power which means that the output power is 14 dBm.
•
Bandwidth (MHz)
•
Modulation Scheme
•
FEC (Forward Error Correction)
•
Guard Interval
•
Transmitted bitrate (Mbps)