SVP UDT-4K, Manual

Page: 105 / 193

UDT-4K UHD HEVC Digital Camera Transmitter
MANUAL V0
105
3. Select MSK option and set the Subnet Mask address. To change the
Subnet Mask address first press OK button and then, with the Up,
Down keys select the desired number. To change from one character
to another, press Right, Left keys. Press the OK button to save the
introduced value.
Figure 5.3: Subnet Mask
4. Select GAT option and set the Gateway address. To change the
Gateway address first press the OK button and then, with the Up,
Down keys select the desired number. To change from one character
to another, press Right, Left keys. Press the OK button to save the
introduced value.
Figure 5.4: Gateway
5. Select Admin Pass option and set the administrator’s password. To
access to the Webserver directly without setting any password, the
Admin Pass must be set to 0 (00000000). However, if you want to set
an administrator’s password, it is necessary to introduce 8 digits. In
this way, with this password, the administrator can access to the
Webserver and make any configuration, modification or monitoring.
Figure 5.5: Admin Pass