SVP HDR-102, Manual

Page: 85 / 237

HDR-108/HDR-104/HDR-102 Diversity Receivers
MANUAL V9.8 85
4.6.2.5.3
Unit Alarms Screen
In this section, you can View and Configure the Alarms shown by the
Receiver.
Figure 4.78: Unit Alarms menu
To Configure the Alarms shown by the Receiver, press OK button while
Config option is selected:
Figure 4.79:Alarms Configuration selection
Once inside Configuration menu, the Alarms which are wanted to be
monitored can be enabled. Alarms which are disabled will not being
monitored by the Receiver.
The available alarms are:
 Input Signal Not Present
 Decoder Is Not Decoding
 No Video Present
 DC Voltage Low
 DC Voltage High
 High Temperature
 Remote GPS Not Present
 Local GPS Not Present
 Compass GPS Not Present
 Inclinometer Not Present