Sven SPS-611S, Operation Manual

Page: 18 / 21

✶
ENG
Multimedia Speaker System 2.0
If none of the above methods can not solve the problem, please seek professional advice at your
nearest service center. Never attempt to repair the product yourself.
Problem
MSS does not
turn on.
No sound.
There is too quiet
sound of speakers.
Distortion of
sound.
Cause
MSS is not connected to the mains outlet.
Power switch is o
✆
.
Volume level is set at minimum value.
Improperly connected audio source.
Volume level is set at minimum value.
Large amplitude of the input signal.
Solution
Check the connection.
Turn on the switch.
Adjust volume control knob.
Connect audio sources correctly.
Adjust volume control knob.
Turn down source volume
and MSS volume.
8. TROUBLE SHOOTING
• Before connecting be sure that all components are switched o
✆
.
•
Connect speakers with the acoustic cable.
• Insert mini-jack of the signal cable into the output of the PC soundcard, VCD output, CD one and
so on. Then connect two signal cable plugs with master speaker output (match the colours).
Notes. Check fi xation of wires in connection terminals (otherwise there can be considerable
noise during sound production) and absence of circuit between wires and metal parts of
equipment.
• Plug the connector to power socket.
• Adjust the volume knobs
c
to the minimum; revolve the power button
d
on the side of the
master speaker.
• Adjust the volume knob
c
to the necessary volume.
•
Adjust TREBLE b and BASS c knobs to desired level.
• Use the soundcard Line-Out port to improve sound quality.