USER’S MANUAL
5.6 Overloads instruction
Do not plug in equipment over 1400W for Smart RM 2000, or 2100W for Smart RM 3000.
6. CONTROLS AND INDICATORS
Front and rear panel diagram
Front Panel
Rear Panel
Major feature description and Indicators
(I) ON/OFF/TEST Switch
This button controls the operation of power to the UPS and its output receptacles. To power on/off the UPS, press and hold the button
for approximately 1 second. You will hear one short beep when ever the UPS is powered On/Off. «Power On/Off the UPS».
Press and hold the button for approximately 4 seconds when utility is normal, when you hear 4 beeps of alarm release the button. The
UPS will then run a 10 second self-test routine. This provides a convenient means of testing the UPS's battery. «Self test feature».
During a utility power outage, the UPS will emit one beep once every 10 seconds and the yellow LED will be illuminated to remind you
that your equipment is operating from a source of power that is limited in duration.
Overload percentage (%) On AC mode
UPS Status
110%
Alarm sounds every 3 sec for 2 beeps but the UPS won`t shut down due to this overload
conditioncontinuously but the UPS won’t shut down due to this overload condition.
125%
Alarm sounds every 4 sec for 2 beeps and the UPS will shut down due after 30 sec.
135%
Shut down immediately.
Output short
Circuit breaker trip.
Overload percentage (%) On DC mode
UPS Status
110%
UPS will shut down after 10 sec. continuous beeping.
120%
UPS shuts down at once.
16
Summary of Contents for Smart RM 2000
