USER’S MANUAL
1. INTRODUCTION
Thank you for purchasing our Smart Rack Series UPS. Please read the USER’S MANUAL before installing your UPS since it contains
information that should be followed during the installation process. It also provides the UPS specifications, safety instructions, and trou-
bleshooting guide along with the customer support information.
The Smart Rack 2U UPS is an extremely reliable, uninterruptible power system that is designed to keep computers and peripheral
devices, i.e. telecommunications, networking, advanced server equipments, monitors, storage subsystems and other sensitive equip-
ment, performing in the event of utility line failures that could result in damage of data.
When the Smart Rack/Tower UPS is plugged in, the UPS maintains the battery in a charged condition which helps to protect your equip-
ment from surges and noise brought through utility lines.
2. THE MAIN FEATURES
!
Sine wave output.
!
Automatic Voltage Regulation (AVR).
!
Advanced equipment & data protection from blackouts, brownouts, sags, AC line noise and surges.
!
Full analytical high performance microprocessor control with true RMS synchronous calculation.
!
Intelligent battery management for battery status, battery power saving & battery replacement control.
!
DC direct starts up capability, complete diagnostic indication and control.
!
RJ45 port for standard USB (Plug & Play) communication interface. USB (Optional).
!
Telephone RJ11 surge protection.
!
EPO (Emergency Power Off) Port.
!
Built-in expansion slot for a SNMP CARD.
3. PACKAGE INCLUDES
1) Rack Mount 2U – 1 pcs
2) Output Power Cord – 2 pcs
3) Input Power Cord – 1 pcs
4) RJ45 to USB cable – 1 pcs
5) RJ45 to RS-232 cable – 1 pcs
6) Phone Jack Cable – 1 pcs
7) PowerManager Software CD – 1 pcs
8) Instruction manual – 1 pcs
9) Warranty card – 1 pcs
10) Metal base for holding the UPS – 2 pcs
4. SAFETY INSTRUCTIONS
Receiving Inspection
Once you have received the UPS, you should remove and inspect the unit for any shipping damage. If damage is found, immediately
notify the carrier and your dealer. You should keep both the shipping carton and the packaging foam in the event the UPS must be
returned to the factory for service. (Damages sustained in transit when shipped from the user are not covered under the warranty.)
Important Safety Instructions.
All safety and operating instructions should be read carefully before operating your UPS.
PRIOR TO FIRST TIME USE, YOUR UNIT SHOULD BE CHARGED FOR AT LEAST 8 HOURS TO INSURE THE BATTERY IS FULLY
CHARGED.
CAUTION:
When replacing the battery, use the proper model and type that is given in the Specifications for the UPS. All batteries must
be disposed of properly in accordance with State and Federal laws. Batteries are a high risk for electrical shock and burns caused by
short circuit. Use safety precautions when handling batteries.
14
Summary of Contents for Smart RM 2000
