ENG
22
Soundbar with Wireless
Subwoofer
Player mode
The system will automatically switch to the Player mode if you install USB ash in the slot
i
or
use the
c
button on the top panel or the
i
button on the remote control. The selected mode is
displayed on the LED-display. Playback starts automatically.
Bluetooth mode
To transmit a signal in this mode, at rst connect the device to the signal source (see Fig. 6). To
do this, select the Bluetooth mode using the
c
button on the top of the soundbar or the
i
button
on the remote control. The MSS switches to the search mode, the display a displays «BLUE».
It is necessary to select the search mode of devices with Bluetooth on a signal source (telephone,
notebook, smartphone, etc.). «SVEN SB-700», massage will be displayed on the screen which is to
be connected to*.
If the connection is successful, the «BLUE» indicator has a steady glow. If the connection fails, the
«BLUE» indicator is intermittent. It is necessary to re-translate the system into the search mode
(turn it o and on again) **.
During connection to the source, you can control the source player using the
e
-
g
buttons on
the remote control.
SLEEP mode
The «SLEEP» mode allows the product to be transferred to the «ST-BY» mode after the
user-selected time has elapsed. To switch to the «SLEEP» mode, press the
k
button on the remote
control. To exit the «SLEEP» mode, press the
k
button on the RC repeatedly until 0 appears.
Note. Due to the constant development of the software, the actual MSS operation may
differ from that described in this manual. The most recent version of the manual is
available at www.sven. .
* You might have to enter “0000” code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search mode activation is not obligatory.
Choose the item name «SB-700» and the “connect” command on the source.
