ENG
20
Soundbar with Wireless
Subwoofer
Fig. 3. Remote control
Remote control
a
: POWER button
b
: sound o /on button;
display brightness adjustment (in ST-BY mode)
c
TR-/TR+: HF volume control
d
VOL-/VOL+: volume control
e
Previous track in Player and Bluetooth mode
f
Play/Pause in Player and Bluetooth mode
g
Next track in Player and Bluetooth mode
h
SUB-/SUB+: subwoofer volume control
i
SOURCE: the MSS mode selection (Bluetooth/USB/OPT/LINE)
j
CIN/TV: Movie or TV mode
k
Sleep: Sleep mode
l
Reset: return to default settings
Battery Installation
Open the battery compartment on the back of the remote control.
Insert the included AAA batteries.
Close the battery compartment.
Notes:
Use the RC at an angle no more than 30° at a distance of no
more than 7 meters.
Direct the remote control to the infrared receiver on the
subwoofer.
If the remote control does not operate, check the batteries
or replace the discharged batteries with new ones.
Remove the batteries from the RC if you don t intend to use it for a long time (more than one
week).
5. PREPARATION AND OPERATION
Assembly and installation of the system
The soundbar is delivered in disassembled form. Connect the left and right speakers to the
central control module: rst connect the cables between the center module and the side satellites.
After connecting the satellites themselves to the central module and x by turning around the axis.
A wireless subwoofer emits a non-directional sound, so it can be placed anywhere in the room in
which the subwoofer will sound best. Installation completed.
Note: It is recommended to hang the soundbar on the wall under the TV set using the wall
mount set (included).
a
b
c
c
d
d
e
f
g
h
h
i
j
k
l
