ENG
21
Operation Manual
SB-700
MSS onnecting and control
SB-700
soundbar with a wireless subwoofer can be connected to virtually any audio source:
DVD/CD player, TV, PC, laptop, etc. (see connection diagram in Fig. 4).
Connect the power cable with the power adapter (included). Then connect it to the the DC IN
h
jack of the soundbar (see Fig. 4). Connect the subwoofer power cable to the mains oulet.
To connect the speakers to a PC, TV, mobile devices, etc., use the mini-jack signal cables to
the mini-jack (included).
To connect Speaker System to PC and TV use optical cable (included).
Connect the power adapter to the mains oulet. The power LED
a
on the front control panel will
light up. Then switch on the subwoofer with the POWER switch (ON position) on the subwoofer rear
panel.
To switch on the soundbar, press button
b
on the control panel or button
a
on the remote
control. The LED display
d
will light up. To switch the soundbar o , press the Standby mode button
again.
At the rst turn on, the soundbar and subwoofer will automatically establish a connection
between themselves. As soon as the connection is installed, the LED on the rear panel of the
subwoofers will change the light from intermittent to permanent.
Press the
c
button and select the signal source.
Adjust the master volume with the VOL+
d
and VOL-
d
buttons on the RC.
Adjust the subwoofer volume with the SUB+
h
and SUB-
h
buttons on the RC.
Select the equalizer option (Cinema/TV), by pressing the
j
button on the RC.
After using the MSS, mind to switch it o using button
a
on the RC, switch o the subwoofer
using the POWER switch (OFF position) on the subwoofer rear panel and unplug the power adapter
from the socket.
Fig. 4. Connection diagram
Subwoofer
PC
Power
adapter
TV
Mini-jack to mini-jack
signal cabl
Sockets
Optical cable
Optical
USB
AUX
TV
Mobile
device
Laptop
PC
USB- ash
