ENG
14
Portable Speaker System
with Bluetooth and FM-radio
OPERATION MODES
Bluetooth mode
Wireless data transfer via the Bluetooth protocol enables to connect speaker system
to compatible devises. Maximum radius of action of data transfer is 10 m. Such
obstacles as walls or other electronic devices can interfere with the signal transfer.
Turn on the speaker system Bluetooth mode
press button
b
several times until
the indicator
a
will start blinking blue color frequently
.
It is necessary to select the search mode of devices with Bluetooth on a signal
source (telephone, notebook, smartphone, etc.).
“
SVEN PS-200BL
”
massage will be
displayed on the screen which is to be connected to*.
When connection is successful, there will be a short beep and the indication of the
search mode on speaker system is over**.
The indicator
a
blinks blue shortly during the data exchange with a device con-
nected via Bluetooth.
Radio mode
To improve radio reception, connect the cable 3.5 mm mini-jack (included) to the AUX
l
.
Turn on the speaker system
press button
b
several times until the indicator
a
will glow
green color. Short long the button
g
activates auto search mode. After
scanning completion, the rst scanned radio station will start to operate automatically.
With buttons
f
and
h
select a desired radio station.
3 player mode
Attention! The le system of a micro SD carrier is FAT32. Maximum volume is 32
GB. It is not recommended to use the micro SD Ultra Speed.
Insert the micro SD carrier into appropriate slot. If the speaker system is in turned
on position, the playback will start automatically. Playback/Pause modes are switched
over with the help of the button
g
. Tracks can be controlled by buttons
f
(previous
track) and
h
(next track).
The use in the wired mode (AUX)
Speaker system can be used as an external device for amplifying any audio source
with a 3.5 mm output mini-jack. To do this, connect a cable mini USB, plug 3.5 mini-
jack to the audio output AUX
l
.
* You might have to enter 0000 code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search
mode activation is not obligatory. Choose the item name SVEN PS-200BL and the
“
connect
”
command on the source.
