ENG
18
Multimedia Speaker System 2.1
Power cord
Right speaker
Left speaker
Mini-jack to mini-jack
signal cable
DVD/VCD, TV
CD
COMPUTER
PLAYER
Fig. 3. Connection diagram
Mini- jack to
mini-jack signal
cable
Mini-jack to
mini-jack adapter
7. INSTALLATION AND OPERATION GUIDE
MS-321 Multimedia Speaker System can be connected to virtually any audio source: DVD/CD, PC
sound card, etc. (see connection diagram below).
•
Before connecting make sure that MSS is switched o
Ԛ
. Then connect the acoustic cables built into
speakers into OUTPUT of the subwoofer: the left speaker to LEFT output
i
, the right speaker to
RIGHT output
j
.
•
Insert the mini-jack (Ø 3.5 mm) of the signal cable (included) into INPUT of the subwoofer
h
, then
connect it into LINE OUT port of the PC sound card or OUTPUT of the
ǀDŽ
3/CD-player (see diagram
above).
Notes:
•
Sound quality is directly affected by correctness and reliability of the connection of
cables. It is recommended to use cables that are included in the package contents of the
MSS. Usually, the right channel is marked in red, and the left channel is marked in white.
•
To connect the MSS to a VCD/DVD player or a TV, use the included mini-jack to mini-jack
signal cable and mini-jack to 2RCA adapter.
•
Adjust VOLUME control knob
c
on the subwoofer to its minimum, then connect the subwoofer to
a mains outlet via the built-in power cord
l
.
•
Switch on the subwoofer by POWER switch
k
(position ON). Then turn on an audio source and
adjust the subwoofer volume level by VOLUME control knob
c
, bass level and treble level by BASS
control knob
b
and TREBLE control knob
d
respectively.
•
Headphone volume level is adjusted by turning PHONES VOLUME knob
e
.
•
After
ԛ
nishing using the MSS, mind to shift POWER switch
k
to OFF position, and unplug the
power cord
l
.
INPUT
OUTPUT
LEFT
RIGHT
