ENG
28
2.1 Multimedia Speaker System
Tuner Mode
Use MODE button
c
on the front panel of the subwoofer or FM button
j
on the remote control
to enter the Tuner mode. The display
a
will backlight the current adjustment frequency.
Press and hold button
e
on the front panel of the subwoofer or button
f
on the remote control
short to auto scan and memorize the found stations. The second pressing of this button before the
scanning is over will stop the auto scanning process. The display
a
shows the frequency being
scanned, when a radio station is being memorized, the display shows its assigned sequence
number for a short moment.
For manual scanning, use buttons TUNING -/+
h
on the remote control (up/down the frequency
range).
If preset radio stations are available in the memory, you can switch from one to another by short
pressing buttons
d
and
f
on the front panel of the subwoofer or buttons
g
and
l
on the remote
control. You can also enter the frequency or the number of the preset station using numeric pad
buttons
b
on the remote control. The display
a
will show the station number for a short moment
and then its frequency.
“Line input” Mode (PC)
Press MODE button
c
on the front panel of the subwoofer or PC/BT button
d
on the remote
control to switch to the PC mode. The display
a
will show PC inscription.
ST-BY Mode
To enter/exit this mode, press and hold down MODE button
c
on the front panel of the
subwoofer or button
a
on the remote control.
MUTE Mode
To enter the MUTE mode, press button
c
on the remote control. To exit the MUTE mode, press
this button
c
once again.
Note. Due to the constant development of the software, the actual MSS operation may
differ from described in this Manual. The most recent version of the Manual is available at
www.sven. .
