ENG
26
2.1 Multimedia Speaker System
FM
ANT
L
R
L
R
AUDIO INPUT
AUDIO OUTPUT
ON
OFF
~220V/50Hz
BASS
WARNING:SHOCK HAZARD-DO NOT OPEN
Made in china
PC
Fig. 4. Connection diagram
USB ash/SD card
connection
CD
DVD
USB
SD
SD/MMC
USB
Connect the subwoofer to the mains outlet with the power cord
n
.
Turn on the MSS power supply using switch
m
(ON position) on the subwoofer rear panel.
Turn on the MSS by pressing MODE button
c
on the front panel or
a
button on the remote con-
trol.
Select a desired signal source by pressing short MODE button
c
on the control panel or pressing
corresponding button on the remote control.
Adjust the master volume as desired with knob
b
on the control panel or with the VOL+/- buttons
i
on the remote control.
Use BASS+/- knob
i
on the rear panel to adjust the subwoofer volume level.
In order to have the high- delity reception orient the antenna in direction of radio signal when
listening to the radio, rst connecting the antenna to FM ANT jack
j
(see Fig. 4).
When the MSS operation is over, mind to switch it o using switch
m
(OFF position) and unplug
the power cord
n
from the socket.
6. OPERATION MODES
Player Mode
The system will enter the Player mode automatically when a carrier (USB ash or SD/MMC card)*
is connected to corresponding ports
g
or
h
; or press MODE button
c
on the front panel of the
subwoofer or USB/SD button
e
on the remote control. The LED display
a
will show the selected
mode, then the number of the tracks found and the track s number on the play list and then the
playback time. The playback will start automatically.
PC
Player
Right
speaker
FM antenna
2RCA to 2RCA
signal cable
2RCA to mini-jack
signal cable
Left
speaker
CD player
