ENG
27
Operation Manual
MS-2050
Operation Manual
MS-307
FM
ANT
L
R
L
R
AUDIO INPUT
AUDIO OUTPUT
ON
OFF
~220V/50Hz
BASS
WARNING:SHOCK HAZARD-DO NOT OPEN
Made in china
PC
To select a track, you can directly enter its number on the remote control using the numeric pad
buttons
b
. The display
a
will show the track number for a short time and then the playback time
elapsed.
EQ mode (in the Player mode). There are ff available preset settings: bas; pop; roc; jaz; cla; cou;
nor.
* The operation may be incorrect if a SD card of 512 Mb capacity or lower is used. If a USB ash device of
fi Gb capacity or more is used, command processing time may be extended.
Bluetooth mode
In order to transmit signal in this mode it is necessary at rst to connect the device with a signal
source (see Fig. 5). For this purpose select the Bluetooth mode using MODE button
c
on the front
panel of the subwoofer or PC/BT button
d
on the remote control. After 2-3 seconds the speaker
system will enter the search mode, BLUE mode will be shown on the display
a
.
It is necessary to select the search mode of devices with Bluetooth on a signal source (telephone,
notebook, smartphone, etc.). MS-30ff message will be displayed on the screen which it should
be connected to
!
.
The BLUE indicator lights continuously when connection is successful. If there is no connection,
BLUE indicator will blink. In this case the system should be switched over to the search mode once
again (turn o and turn on Bluetooth mode)**.
* You might have to enter 0000 code to connect some models via Bluetooth.
** If an item has been already registered in the device list of sources, then the second search mode
activation is not needed. Choose only the item name and the connect command on the source.
Right
speaker
Left
speaker
USB
SD
SD/MMC
USB
Phone
PC
FM antenna
USB ash/SD card
connection
Fig. 5. Bluetooth module connection diagram
