ENG
5
MS-2020
Operation Manual
Remote control
a
: power switch
b
SOURCE: switch button of AUX/PC/Bluetooth/FM/USB/
SD.
c
TONE/LOUD: treble and bass level up/down (
short press );
on/off
loudness mode (long press)
d
TUNE-/+: manual band scanning (in the Radio mode)
e
VOL+/-: volume level control buttons
f
: previous track (in the Player and Bluetooth mode);
previous station* (in the Radio mode)
g
/AUTO: Play/Pause (in the Player and Bluetooth mode);
auto scan start/stop (long press in the Radio mode)
h
: next track (in the Player and Bluetooth mode);
next station* (in the Radio mode)
i
0-9: numeric pad
j
MUTE: sound on/off button
k
REPEAT/RESET: repeat mode selection button (short press
in the Player mode):
ONE — repeats the current track;
RAND — play tracks in the random order;
ALL — plays all tracks in the sequential order;
return to default settings (long press)
l
SAVE/DEL: memorize selected frequency (short press in
the Radio mod);
deleting a memorized station (long press in the Player mode)
Battery installation
•
Open the battery compartment on the back of the remote
control.
•
Insert the included AAA batteries
•
Close the battery compartment.
Notes. Use the RC at an angle no more than 30° at a distance of no more than 7 meters.
If the remote control does not operate, check the batteries or replace the discharged bat-
teries with new ones. Remove the batteries from the RC if you don’t intend to use it for a long
time (more than one week).
* The frequencies are switched if stations have been preset in the memory.
** The storage device must be formatted as FAT, FAT32. Memory cards SDHC class 10 or less
can be used. Connection of external hard disks other than USB flash drive is not recommended,
otherwise it can cause the MSS damage.
Fig. 4. Remote control
