ENG
6
2.1 Multimedia
Speaker System
5. PREPARATION AND OPERATION
Speaker placement
•
Place the speakers symmetrically to the listener at least one meter away. The subwoofer emits
non-directional sound, therefore it can be located in any place of the room where it sounds the best.
•
Place MSS as far away as possible from monitors and TV sets, to avoid insignificant image
distortion.
Installation and operation
MS-2020 speaker system can be connected to virtually any audio devices: PCs, laptops, etc. (see
connection diagram in Fig. 5).
•
Before making any connections, make sure the MSS is off and unplugged. Then connect
speakers to the subwoofer OUTPUT L/R
i
jacks using built-in audio cables. Connect the right
speaker to the subwoofer OUTPUT R and the left speaker — to the OUTPUT L (see connection
diagram in Fig. 5).
Note. Check the fixation connectors.
•
To wired connect the MSS use mini-jack to mini-jack signal cable (included). Connect
the subwoofer to the mains outlet with the power cord
j
.
•
Turn on the MSS power supply using switch (
k
, ON) (ON position) on the subwoofer rear panel.
•
Turn on the MSS by pressing button
b
on the front panel or
a
button on the remote control.
Select a desired signal source by pressing short SOURCE
b
button on the control panel or pressing
SOURCE
b
button on the remote control.
•
Adjust the master volume as desired with knob
d
on the control panel or with the VOL+/-
buttons
e
on the remote control.
Fig. 5. Connection diagram
L
R
