ENG
8
2.1 Multimedia Speaker System
Turning on and setting the tuner
•
Press SCAN
g
and FM/AM
i
on the remote control to turn on the tuner and select FM or AM.
• Manual setting.
Press TUNE + or TUNE- buttons
h
on the remote control for
fi
netuning radio
station frequency (see tuning steps in Technical Speci
fi
cations).
• Auto search.
By holding SCAN
g
on the remote control for more than 1 second, you turn on the
scanning of the FM-band starting with 87 MHz frequency, the found radio stations being memorized
sequentially: CH 01, CH 02, CH 03, etc. Scanning of the FM-band will continue until 108 MHz
frequency. After scanning, the
fi
rst found radio station turns on.
•
Additionally, the desired broadcast can be quickly turned on with numeric keypad buttons
k
and
l
on the remote control, having saved systems of 20 FM radio stations and 20 AM radio stations.
To save the found radio station, press MEMORY
j
on the remote control (CH _ will illuminate on the
display), then enter its number (from 0 to 19) with numeric keypad buttons
k
and
l
on the remote
control, which will illuminate on the display (for example, CH 09). After saving the required quantity
of radio stations, enter the number of the desired radio station on the remote control with numerical
keypad buttons
k
and
l
for quick search.
Volume control
•
Press VOL+ or VOL– (
c
, Fig. 3) on the remote control or turn the VOLUME knob (
h
, Fig. 1) on
the front panel of the subwoofer to regulate (increase/decrease) volume level.
Bass, midrange, and treble control
•
Level of bass, midrange and treble is adjusted with buttons
d
and TREBLE–
o
, MIDLE+
e
and MIDLE–
n
, SUB+
f
and SUB–
m
on the remote control. Bass level can be also adjusted
with SUB+
c
and SUB–
d
on the front panel of the subwoofer.
Mute feature
•
Press MUTE
b
on the remote control or the same button on the subwoofer control panel to
temporarily turn o
ff
the sound. Press this button again to turn on the sound.
Note. If the speaker system is not used for a long time, mind to switch off the device by using
the POWER On/Off switch and unplug it.
