ENG
7
BTR2-10
2.1 Multimedia Speaker System
А
M antenna connection
•
To install the loop antenna,
fi
x the bracket to the hole at the bottom of the antenna as shown
below, Fig. 5 (step 1).
•
Turn the visor of AM terminal anticlockwise to loosen it slightly, insert the cord of the loop antenna
under the visor and turn the visor clockwise to
fi
rmly clamp the cord (step 2). Gently pull the cord to
make sure it is securely
fi
xed. Install the antenna in a niche or hang it on the window frame, that is in
a place where reception is better. Place all other cables (power cable, speaker cables or connec-
ting wires) far away from the antenna.
•
After that, connect the loop antenna to AM ANT and AM GNT terminals on the rear panel of the
subwoofer (see connection diagram, Fig. 4).
Note. When the reception is poor in the inner AM loop antenna, it is recommended that an
external AM antenna be used (not included).
Operation guide
Switching On
•
To switch on the subwoofer, plug the power cord of the subwoofer into the mains outlet and shift
the POWER On/ O
ff
switch on the rear panel into the ON position. The display (
a
, Fig. 1) on the
front panel will illuminate.
Standby mode (STANDBY)
•
STANDBY mode feature is designed to quickly switch on the speaker system and save power
consumption. Press STANDBY (
a
, Fig. 3) on the remote control or the STANDBY button (
g
, Fig. 1)
on the control panel to activate/deactivate this feature. If the STANDBY button is on, the
corresponding inscription on the display of the subwoofer will illuminate. Press it again, and the
speaker system will return to the operation mode.
Audio source selection
•
There are two inputs (CD-1 and CD-2) on the rear panel of the MSS. To use a stereo audio source,
connect it to th
у
INPUT terminals
c
and
d
of the speaker system, as shown in Fig. 4.
•
Depending on the required connection, select the desired audio source with the INPUT button
(
p
, Fig. 3) on the remote control or control panel of the subwoofer (
f
, Fig. 1). The corresponding
inscription on the display of the subwoofer will illuminate.
Fig. 5.
А
M antenna connection
1
2
