ENG
3
User Manual
SVEN 255
SAFETY PRECAUTIONS
•
Do not open the GSS and do not perform repairs by yourself. Service and repairs
should be performed only by qualified specialists at authorized service centers. The list
of authorized service centers is on
www.sven.fi
•
Do not allow the circuit of wires (including the grounded ones) between the speakers,
on the power amplifier or the ground, for it causes damage to the power amplifier output
stage.
•
Make sure that foreign objects do not get inside the holes of the GSS.
•
Protect the GSS from high humidity, water and dust.
•
Protect the GSS from heating: do not place it closer than 1 m from a heat source. Do
not expose it to direct sunlight.
•
Do not use any chemical agents for cleaning. Clean it with dry soft cloth only.
•
If the GSS does not operate, unplug it and address your dealer.
GSS special features
•
Dynamically RGB lighting
•
Power supply via USB-port of a PC, laptop or 5V DC power supply
•
Volume control on the cable
•
Audio sources stereo audio input
•
Plastic speakers cabinets
PREPARATION AND OPERATION
Speaker placement
•
Place the speakers symmetrically to the listener at least one meter away.
•
Place GSS far away from monitors and TV sets, as insignificant image distortion in
these super-sensitive devices is possible.
GSS connecting
SVEN 255 Gaming Speaker System can be connected to virtually any audio source: PC
sound card, mobile device, etc. (see connection diagram below).
•
Before connecting, make sure that GSS is unplugged. Connect signal cable mini-jack
3,5 mm built-in speaker to audio output of the sound source, for example computer, as
shown in the diagram below.
•
Connect USB-connector to USB-port of PC (laptop or 5V DC power supply) via built-in
USB-cable.
Note:
• After finishing operation with GSS, mind to turn off the USB-cable from the PC, laptop
USB port or 5V DC power supply.
