Rev. 2018 / www.svb.de / Copyright SVB-Spezialversand Bremen
19
6. Tyres
20“ x 2,125, tyre pressure: 2,8 - 4,6 bar
7. How to achieve the highest reach
• Fully charge the battery after every trip.
• Avoid permanent use of high support levels when riding.
• Avoid starting when the 3rd gear is engaged and a high support level is
selected.
The battery drain is highest that way.
• Use the gear change and adjust the support level according to your needs.
• Regularly check the tyre pressure.
• Oil the chain every 400 km.
8. Care instructions
To guarantee a long lifespan for your electric bike, please keep some important
instructions in mind.
Make sure to dry your bike and wipe off dirt after use. If the bike has had contact
with salt water, immediately clean the electric bike with fresh water. Regularly
use proper care products to protect it from possible corrosion. If you plan on
stowing the bike in a valise, provide sufficient ventilation to prevent corrosion
damage.
Chain, motor and electric parts should be examined and maintained regularly.
For the protection of cables, electric plugs and electric contacts we recommend
„Wet.Protect“ Art. Nr. 68127.
For the mechanic parts „Marine-Spray“ Art. Nr. 16616. Douse the entire bike
without the spray trickling down. Be especially attentive when dousing the cracks
and joints. Prior to use, the bike should be cleaned once. Delicate parts like the
chain, the spokes‘ nuts and sire ropes can be protected with marine grease once.
The same preventive care is to be executed before the winter.
Stainless steel demands precautionary care as well. Without proper care, even
stainless steel can display flash rust or crevice corrosion within just a few weeks.
Insufficient care can lead to corrosion.
Complaints about corrosion are not acknowledged as a warranty case.
Reports on cycling accidents caused by material fatigue, etc. keep showing
up in the media. Regularly check the frame, handlebar and rims for possible
deformations or crackings.
Technical changes reserved.
