Rev. 2018 / www.svb.de / Copyright SVB-Spezialversand Bremen
15
5.2 Important information concerning the bike‘s
battery
As the owner of an Electric Bike you should know some things about the
properties of lithium batteries.
We have collected information and technical background knowledge for you.
Modern battery systems for electric bikes consist of lithium-ion round cells or
lithium-polymer flat cells.
To achieve the needed output voltage and capacity, the battery is equipped
with multiple cells that are arranged in parallel and series circuits. The lithium
batteries are equipped with control electronics which cause the cells‘ consistent
charging process.
Lithium batteries with small measurements and light weight have a very high
energy density. This causes the batteries to be sensitive. The construction of
the bicycle‘s batteries already follows important safety measures. Despite this,
you should handle the batteries with great care. Inappropriate use damages the
batteries and poses risks. We are not accountable for any damages caused by
wrong handling.
The battery‘s guarantee spans 6 months.
Note the following instructions. Disregard can lead to a shortened lifespan,
in an extreme case to uselessness after just a few uses and thus the loss of
entitlement to guarantee/warranty!
•
Do not ride until the battery is completely empty but charge it every now
and then.
Many small charging processes extend the lifespan. To see the
state of charge, check the display on the handlebar or on the battery.
•
Avoid unnecessary strain on the battery. If you are using a bike
without
electric drive
, you will change to a low gear when starting, ascending
a slope or in strong headwind. If you choose a high gear, you will strain
yourself and have a hard time.
When starting, ascending or in strong headwind
with electric drive
,the
motor can do the required work even in higher gears, however, this strains
your battery.
Conclusion: use the gear change when starting, ascending and in strong
headwind.
