SENSOR & ALARM INSTALLATION
2. Alarm
Connect the wire of alarm one pin to alarm terminal, the other pin of the wire
connect to the DC power wire pin as the following picture showed. The other pin
of adapter (power) wire connect to the alarm terminal.
* If the sensor or alarm you purchased is different from above instruction, please
refer to the manual with the sensor/alarm.
OPERATION
The Factory has preset various functions as following list. If it can meet your usage
requirement, please just follow our instructions to use the unit. If you want to
change any pre-set function, please follow our instructions on next paragraph to
change the setting to meet your particular requirement.
The default setting on MAIN MENU
V IDE O INPUT
Main Menu
> CAMERA SELECT
1234
RECORD SELECT
1234
RECORD MODE
EACH
RECORD FRAMERATE
30
VIDEO QUALITY
NORMAL
RECORD SCHEDULE
Default setting 0~24 record.
SUB MENU
HARD DRIVE SETUP
SENSOR SETUP
NETWORK SETUP
PRESS (< , >) THEN (SELECT)
PRESS (MENU) TO EXIT
