Page8of50
IAM02 Time Clock User Manual
Version 1.00
2.0.Machine Mounting Method
Figure 2- 1 Machine Mounting Method
1) Mount the machine on a wall approximately 110 cm above the floor. (Based on the bottom of the
machine)
2) Positioning and punching: Remove the two screws at the bottom of the attendance machine and the
wall panel at the back of the attendance machine.
3)
Fixing the wall panel: Put the expansion screw into the hole, place the wall panel in the correct position
in the perforated area, and fasten the screw into the expansion screw.
4) Fix the device: install the time and attendance machine on the wall plate and fix the screws just
removed from the bottom of the machine.
