SV 104 USER'S MANUAL_
DRAFT
_______________________________________________
_
46
5.4.2
Profile settings tab
The main settings where specific acoustic profile configuration can be set are located under
“Dosimeter” tab. There are already predefined presets in each profile column. By choosing predefined
configuration some obvious fields will be automatically greyed. Others must be setup by the user.
There are three additional user defined presets, whose name can be changed during configuration
with use of the little icon (notes with a pen) which is then enabled.
Apart from alarm
DOSE threshold
there are three additional source of warning alarm, which can be
set. See figure below.
Figure 5-7
Dosimeter settings - profile configuration tab
Notice:
Note, that some profiles can be disabled to be seen later during measurement run
change user
defined preset
name
change additional
source of alarm
