Chevrolet Corvette Owner Manual (Holden-Localizing-Australia/New Zealand-
15749882) - 2022 - CRC - 9/20/21
78
Instruments and Controls
To reset the Transmission Fluid life system,
press the thumbwheel while the Oil and
Fluid Life display is active and select Reset
Transmission Fluid. Confirm by pressing the
thumbwheel.
Air Filter
Air Filter Life :
Displays an estimate of the
engine air filter's remaining useful life as
a percentage and the state of the system.
Air Filter Life 95% means 95% of the current
air filter life remains.
Messages will display based on the engine
air filter life and the state of the system.
If a REPLACE AT NEXT OIL CHANGE message
displays, the engine air filter should be
replaced at the time of the next vehicle
service.
If a REPLACE SOON message displays, the
engine air filter should be replaced at the
earliest convenience.
The Air Filter Life display must be reset after
each engine air filter change. It will not
reset itself. Do not reset the Air Filter Life
display at any time other than when the
filter has just been changed. It cannot be
reset accurately until the next filter change.
To reset the Air Filter Life system, press the
thumbwheel while the Air Filter display is
active and select Reset Air Filter Life.
Confirm by pressing the thumbwheel.
The Air Filter Life display can be disabled by
pressing the thumbwheel and selecting
Disable Air Filter Life. Confirm by pressing
the thumbwheel.
A disabled Air Filter Life display can be
enabled by pressing the thumbwheel to
display the menu and selecting Enable Air
Filter Life. Confirm by pressing the
thumbwheel.
Engine Life
Displays the status of engine usage such as
the total engine revolutions divided by
10,000, the total number of hours the
engine has run and the total number of
hours the engine has been at idle.
Options
Display Design
Press the thumbwheel to enter the Display
Design menu. There are several instrument
cluster display configurations to choose
from: Link to Driver Mode, Tour, Sport,
Track, Weather. The style of the cluster and
information shown will change depending
on the theme selected.
Default is Linked to Driver mode.
Info Tiles Selection
Allows the information tiles that are
displayed on the left-hand side of the cluster
to be changed. Press the thumbwheel to
enter the Info Tiles Selection menu and
select from: Deselect All Info Tiles, Battery
Voltage, eLSD Coupling, Fuel Economy,
Lateral G-Forces, Oil Pressure, Oil
Temperature, Time and Temperature, Tyre
Status, and Transmission Fluid. Press the
thumbwheel to confirm.
Speed Warning
The Speed Warning display allows the driver
to set a speed that they do not want to
exceed. To set the Speed Warning, press the
thumbwheel when Speed Warning is
displayed. Scroll to adjust the value. Press
the thumbwheel to set the speed. Once the
speed is set, this feature can be turned off
by pressing the thumbwheel while viewing
this page. If the selected speed limit is
exceeded, a pop-up warning is displayed
with a chime.
