Chevrolet Corvette Owner Manual (Holden-Localizing-Australia/New Zealand-
15749882) - 2022 - CRC - 9/20/21
Infotainment System
123
.
Engine Revolutions Per Minute (rpm): The
vertical line and triangle indicate current
rpm's. As the rpm's increase, the backfill
follows.
.
Transmission State (Current Gear): Same
as Sport.
.
Friction Bubble Graphic: Lateral and
longitudinal G-Forces are displayed as a
dot within a bubble. A red dot displays
when the vehicle starts braking and turns
green when the vehicle accelerates. The
dot is white when the vehicle is not
moving. A white dot is the default.
.
Brake and Throttle Graphic: Displays
the percentage value of brake and
throttle pedal position from 0
–
100%.
.
Steering Angle: The graphic fills from the
centre to the left or right depending on
the direction of steering. The numerical
steering angle displays below the graphic.
.
Active Handling Active Indicator: The
graphic only displays if the active
handling systems are activated.
.
Performance Traction Management (PTM)
Mode: Displays the current PTM mode.
The options are Wet, Dry, Sport 1, Sport 2,
or Race.
.
Current Lap Time: Displays the elapsed
lap time if the finish line is defined and
the vehicle has crossed the defined finish
line at least once.
.
Event Odometer: This displays the
distance driven since the recording began.
.
Drive Mode: Displays the vehicle's current
drive mode.
Timing:
Displays these vehicle metrics:
.
Vehicle Speed: Same as Sport.
.
Engine Revolutions Per Minute (rpm):
Same as Sport.
.
Transmission State (Current Gear): Same
as Sport.
.
0
–
100 km/h, 0
–
200 km/h, 400 m, and
0
–
200
–
0 km/h: The timer starts recording
as soon as the vehicle accelerates. As the
vehicle passes each speed and distance
milestone, it is displayed on the overlay.
.
Throttle Position: Displays the percentage
of throttle applied from 0
–
100%.
.
Active Handling Active Indicator: The
graphic only displays if the active
handling systems are activated.
Lap Timing
Touch Lap Timing on the PDR tab to display
the track selection screen.
.
Select Custom Track, then Learn to create
a new custom track for lap timing.
.
Select Custom Track, then Relearn if a
custom track has already been defined
and is available on the storage device.