Chevrolet Corvette Owner Manual (Holden-Localizing-Australia/New Zealand-
15749882) - 2022 - CRC - 9/20/21
184
Driving and Operating
If the brakes are applied, cruise control
disengages.
Cruise control will disengage if either TCS or
StabiliTrak/Electronic Stability Control (ESC)
is turned off.
1
:
Press to turn cruise control on or off.
A white indicator comes on in the
instrument cluster when cruise is turned on.
+RES :
If there is a set speed in memory,
press briefly to resume to that speed or
press and hold to accelerate. If cruise control
is already engaged, use to increase vehicle
speed.
SET
–
:
Press briefly to set the speed and
activate cruise control. If cruise control is
already engaged, use to decrease vehicle
speed.
*
:
Press to disengage cruise control
without erasing the set speed from memory.
Setting Cruise Control
If
1
is on when not in use, SET
–
or +RES
could get pressed and go into cruise when
not desired. Keep
1
off when cruise is not
being used.
1. Press
1
to turn the cruise system on.
2. Get up to the desired speed.
3. Press and release SET
–
on the steering
wheel.
4. Remove foot from the accelerator.
The cruise control indicator on the
instrument cluster turns green after cruise
control has been set to the desired speed.
See
.
Resuming a Set Speed
If the cruise control is set at a desired speed
and then the brakes are applied or
*
is
pressed, the cruise control is disengaged
without erasing the set speed from memory.
Once the vehicle reaches about 40 km/h or
more, briefly press +RES. The vehicle returns
to the previous set speed.
Increasing Speed While Using Cruise Control
Do one of the following:
.
Press and hold +RES until the desired
speed is reached, then release it.
.
To increase vehicle speed in small
increments, briefly press +RES. For each
press, the vehicle goes about 1 km/h
faster.
Reducing Speed While Using Cruise Control
Do one of the following:
.
Press and hold SET
–
until the desired
lower speed is reached, then release it.
.
To decrease the vehicle speed in small
increments, briefly press SET
–
. For each
press, the vehicle goes about 1 km/h
slower.
Passing Another Vehicle While Using Cruise
Control
Use the accelerator pedal to increase the
vehicle speed. When you take your foot off
the pedal, the vehicle will slow down to the
previously set cruise speed.