manualshive.com logo in svg

Suzuki SX4 2016, Owner'S Manual

The Suzuki SX4 2016 Owner's Manual is a comprehensive guide that provides detailed information on operating and maintaining the vehicle. With its user-friendly format, this manual is essential for all SX4 owners. Download your free copy of the manual from manualshive.com and stay informed about your vehicle's features and functionality.

Share
Download
background image

13-4

INDEX

83RM0-01E

K

Keyless Entry System Transmitter ............................. 2-6

, 

2-13

Keyless Push Start System .................................................. 3-6
Keyless Push Start System Remote Controller ........... 2-6

, 

2-7

Keys ........................................................................................ 2-1

L

Lap-Shoulder Belt................................................................ 2-33
Lap-Shoulder Belt with Detachable Connector ................ 2-34
LED Headlight Warning Light ............................................. 2-93
LED headlights..................................................................... 7-53
License Plate Light .............................................................. 7-60
Light Reminder Buzzer...................................................... 2-102
Lighting Control Lever ........................................................ 2-98
Lighting Operation............................................................... 2-99
Listening to a CD ................................................................. 5-52
Listening to an iPod

®

.......................................................... 5-62

Listening to an MP3/WMA/AAC disc.................................. 5-55
Listening to files stored in a USB device .......................... 5-59
Listening to the radio .......................................................... 5-47
Low Fuel Warning Light ...................................................... 2-92
Low Tire Pressure Warning Light ............................. 2-85

, 

3-78

Luggage Compartment ......................................................... 5-7
Luggage Compartment Board ............................................ 5-18
Luggage Compartment Cover ............................................ 5-18
Luggage Compartment Hooks ........................................... 5-17
Luggage Compartment Pocket........................................... 5-16

M

Main Beam (high beam) Indicator Light ............................ 2-93
Maintenance Recommended under Severe Driving 
Conditions (except for Russia).................................... 7-8

, 

7-18

Maintenance Recommended under Severe Driving 
Conditions (for Russia) - For K14C engine model ..........12-16
Maintenance Recommended under Severe Driving 
Conditions (for Russia) - For M16A engine model............12-6
Maintenance Schedule ..........................................................7-2
Malfunction Indicator Light .................................................2-90
Manual Heating and Air Conditioning System ..................5-28
Manual mode ...............................................................3-23

, 

3-30

Manual Transaxle .................................................................3-20
Manual Transaxle Oil ...........................................................7-37
Master Warning Indicator Light ..........................................2-98
Mirrors...................................................................................2-22

O

Odometer ..............................................................................2-71
Oil Change Request Light ...................................................2-94
Oil Level Check ....................................................................7-25
Oil Life ...................................................................................2-67
Oil Pressure Light ................................................................2-89
Open Door Warning Light ...................................................2-91
Outside Rearview Mirrors....................................................2-23
Outside Rearview Mirrors Folding Switch .........................2-24
Overhead Console ...............................................................5-12

P

Parking Brake .......................................................................7-42
Parking Brake Lever ............................................................3-10
Parking Sensors...................................................................3-61
Pedal......................................................................................3-11
Periodic Maintenance Schedule (except for Russia) 
- For D16AA engine model ..................................................7-13
Periodic Maintenance Schedule (except for Russia) 
- For K10C engine and K14C engine model.........................7-3

Summary of Contents for SX4 2016

























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SX4 2016

Jackco SHARP ALIGN User Manual preview
SHARP ALIGN
Brand: Jackco Pages: 11
FABBRI PORTATUTTO 17405400 Assembly Instructions preview
17405400
Brand: FABBRI PORTATUTTO Pages: 2
APS Auto Parts Specialist iBoard IB-ZK406 Installation Instructions preview
iBoard IB-ZK406
Brand: APS Auto Parts Specialist Pages: 3
GMC ANDROID INTERFACE Instruction Manual preview
ANDROID INTERFACE
Brand: GMC Pages: 18
Prorack K496 Fitting Instructions For Basic Carrier preview
K496
Brand: Prorack Pages: 15
Trailboss QTHD519L Fitting Instructions Manual preview
QTHD519L
Brand: Trailboss Pages: 8
Dometic Heki 2 Installation And Operating Manual preview
Heki 2
Brand: Dometic Pages: 158
minnid 1.240.344 Operating Instructions Manual preview
1.240.344
Brand: minnid Pages: 44
Easee Home Wallbox Installation Instructions Manual preview
Home Wallbox
Brand: Easee Pages: 12
Whispbar K951W Fitting Instructions For Basic Carrier preview
K951W
Brand: Whispbar Pages: 15
Valeo Park Vision VAL632210 Instruction Manual preview
Park Vision VAL632210
Brand: Valeo Pages: 25
BMW 51 47 0 027 792 Installation Instructions Manual preview
51 47 0 027 792
Brand: BMW Pages: 7
Ford 2007 Navigator (Spanish) Owner'S Manual preview
2007 Navigator
Brand: Ford Pages: 728
Westin 58-53935 Installation Instructions preview
58-53935
Brand: Westin Pages: 5
Thule PORTAGE 819 Instructions Manual preview
PORTAGE 819
Brand: Thule Pages: 12
Thule RaceWay 991 Instructions Manual preview
RaceWay 991
Brand: Thule Pages: 12
rough country 921107830 Installation Instruction preview
921107830
Brand: rough country Pages: 4
S&B Filters 75-5053 Installation Instructions preview
75-5053
Brand: S&B Filters Pages: 4

Brands by name

Popular brands

Load more brands