Suzuki SWIFT RS415 2017, Service Manual

Page: 272 / 1257

1D-9 Engine Mechanical:
Air Cleaner Element Inspection and Cleaning
S4RS0A1406002
Inspection
Check air cleaner element for dirt. Replace excessive
dirty element.
Cleaning
Blow off dust by compressed air from air outlet side of
element.
Cylinder Head Cover Removal and Installation
S4RS0A1406011
Removal
1) Disconnect negative cable at battery.
2) Disconnect MAF sensor coupler (1).
3) Remove EVAP canister purge valve (2).
4) Remove air cleaner case (3) and resonator (4).
5) Remove cylinder head upper cover (5).
6) Disconnect ignition coil couplers (1).
7) Remove ignition coil assemblies (2) with high-
tension cord (3).
8) Remove wire harness clamp (4) from cylinder head
cover.
9) Remove oil level gauge (1).
10) Disconnect PCV hose (2) from PCV valve (3) and
disconnect breather hose (4) from cylinder head
cover.
11) Remove cylinder head cover mounting bolts in such
order as indicated in the figure.
12) Remove cylinder head cover (1) with cylinder head
cover gasket (2) and spark plug hole gasket (3).
Installation
1) Install new spark plug hole gaskets (1) and new
cylinder head cover gasket (2) to cylinder head cover
(3) as shown in the figure.
I2RH0B140150-
4
5
3
1
2
I3RM0A140008-
I2RH0B140032-
I2RH0B140033-
I2RH0B140034-