16
(A)
c) Needle thread
Place the cloth feed table into original position and thread the needle thread in the sequence
①
through
⑪
. Point
③
and
⑩
, pass the thread between both tension discs.
When threading the needle thread into a hole of the needle bar
⑧
, use the threading wire which is in
the accessory box. Insert the wire from lower hole
⑨
of the needle bar as shown in figure.
After threading all thread, replace both cloth clamp plate to the original position and clip the gimp and
looper thread with the clip plate (A). (B) is the thread trimmer for cutting the gimp and looper threads
after sewing.
Threading wire
Part No. S1-3211
(B)
