Suzuki Ertiga GLX, Owner'S Manual

Page: 59 / 194

2-45
BEFORE DRIVING
60MK1-82E
Anti-Lock Brake System (ABS)
Warning Light
65D529
When the engine switch is pressed to
change the ignition mode to “ON”, the light
comes on briefly so you can check that the
light is working.
If the light stays on, or comes on when
driving, there may be something wrong
with the ABS.
If this happens:
1) Pull off the road and stop carefully.
2) Change the ignition mode to “LOCK”
(OFF) by pressing the engine switch
and then start the engine again.
If the warning light comes on briefly then
turns off, the system is normal. If the warn-
ing light still stays on, the system will be
something wrong.
If the light and the brake system warning
light stay on, or come on simultaneously
when driving, your ABS system is
equipped with the rear brake force control
function (proportioning valve function) and
there may be something wrong with both
the rear brake force control function and
anti-lock function of the ABS system.
If one of these happens, have the system
inspected by your SUZUKI dealer.
If the ABS becomes inoperative, the brake
system will function as an ordinary brake
system that does not have this ABS sys-
tem.
For details of ABS system, refer to “Anti-
Lock Brake System (ABS)” in the “OPER-
ATING YOUR VEHICLE” section.
Oil Pressure Light
50G051
This light comes on when the engine
switch is pressed to change the ignition
mode to “ON”, and goes out when the
engine is started. The light will come on
and remain on if there is insufficient oil
pressure. If the light comes on when driv-
ing, pull off the road as soon as you can
and stop the engine.
Check the oil level and add oil if necessary.
If there is enough oil, the lubrication sys-
tem should be inspected by your SUZUKI
dealer before you drive the vehicle again.
NOTICE
• If you operate the engine with this
light on, severe engine damage can
result.
• Do not rely on the oil pressure light
to indicate the need to add oil. Be
sure to periodically check the
engine oil level.