Suzuki Ertiga GLX Owner'S Manual Download Page 128

Page: 128 / 194

5-20

OTHER CONTROLS AND EQUIPMENT

60MK1-82E

WARNING

Do not use the frame hooks to tow

another vehicle or to have your vehi-

cle towed on the road or highway.

The hook (1) is designed for use in

emergency situations such as if your

vehicle or another vehicle gets stuck

in deep mud or snow, and sea ship-

ping only. The hook (3) is designed

for use in emergency situations and

trailer/train/sea shipping only.

The hooks (4) and (5) are provided for

trailer/train shipping purposes only.

The hook (6) is provided for sea ship-

ping purpose only.

NOTICE

Never use the hooks (1) for trailer/

train shipping purposes to prevent

damage to the vehicle.

Summary of Contents for Ertiga GLX



































































































































































































Search results

Summary of Contents for Ertiga GLX

Reviews:

Related manuals for Ertiga GLX

Brands by name

Popular brands

Suzuki Ertiga GLX, Owner'S Manual

Search results

Summary of Contents for Ertiga GLX

Reviews:

Related manuals for Ertiga GLX

Brands by name

Popular brands