3-43 ENGINE
Clutch drive and driven plate claw width
Service Limit (drive): 15.15 mm (0.596 in)
(driven): 11.3 mm (0.44 in)
\
09900-20101: Vernier calipers
REASSEMBLY
Reassemble the gearshifting clutch in the reverse order of disas-
sembly. Pay attention to the following points:
• Align the claw
1
of clutch driven plate No.1
2
with the boss
3
of clutch sleeve hub.
• Align the claw
5
of clutch driven plate No.2
4
with the
groove
6
of clutch sleeve hub.
• Face the boss of primary driven gear
7
to upper when install-
ing it.
• Align the claw
8
of clutch driven plate No.1 with the hole
9
of
primary driven gear.
