38
4. Pull out the filter element
5
. Inspect the ele-
ment and the O-rings
6
for damage. If they
are damaged, replace them.
5. Wash the element with clean solvent and dry
it.
6. Reinstall the element and O-rings in their
original positions.
7. Screw the ring nut to the cap until the cup is
lightly seated.
8. Tighten the ring nut approximately an addi-
tional 1/4 turn to secure the cup.
9. Reinstall the fuel filter cap with the bolts.
10.Restart the engine and check that there are
no leaks around the fuel filter.
NOTE:
If any water exists in the fuel filter cup, the red
ring
7
will float. If so, remove the cup and drain
the water. Always dispose of excess fuel safely.
For questions, consult your authorized Suzuki
Marine Dealer.
LUBRICATION
Proper lubrication is important for the safe,
smooth operation and long life of each working
part of your outboard motor. The following chart
shows the lubrication points of your motor and
the recommended lubricant:
LOCATION
LUBRICANT
Throttle/Shift linkage
Marine-grade
water resistant
grease
Propeller shaft
Trim ram pad
Summary of Contents for DF250S
Page 8: ...6...
Page 53: ...DF250S...