Suzuki DF250S, Owner'S Manual, Page: 23 / 53

21
To release the Lever, tilt the motor all the way
up using the Power Trim and Tilt, and pull up
the Tilt Lever.

WARNING
• The remote Power Trim and Tilt switch
will work when the ignition is off. To
avoid injuring your hand while you are
moving the tilt lever, keep all persons
away from the remote Power Trim and
Tilt switch.
• The tilt lever relieves pressure from the
power trim and tilt and should be used
only when boat is moored or otherwise
stationary. Do not use the tilt lever
when trailering your boat and motor.
Refer to the TRAILERING section.
INSPECTION BEFORE
BOATING
It is important to make sure that your boat and
motor are in good condition and that you are
properly prepared for an emergency.
Always perform the following checks before you
begin boating:
• Check that you have enough fuel for the
intended run.
• Check the level of engine oil in the sump.
To check the oil level:
NOTE:
To avoid an incorrect assessment of engine
oil level, check the level only when the
engine has cooled.
1. Place the motor in a vertical position,
then remove the motor cover
1
by
unlocking the lever
2
and
3
.

WARNING
To ensure the safety of all occupants,
always conduct the following inspection
before beginning your trip.
CAUTION
Running the engine with insufficient oil
can cause serious engine damage.