Suzuki DF250S, Owner'S Manual, Page: 22 / 53

20
MANUAL TILTING
If you are unable to tilt the motor using the
“Power Trim and Tilt” because of an electrical
problem or some other problem, you can move
the motor manually. To tilt the motor up or
down, turn the manual release screw
A
two
turns counterclockwise, move the motor to the
desired position, then retighten the release
screw.

WARNING
The motor is very heavy. Ensure that your
grip and footing are secure and that you
are able to support the weight of the
motor.
TILT LEVER
The Tilt Lever is provided so you can support
the motor in a tilted position for non-moving
engine support.
To set the Tilt Lever:
1. Tilt the motor all the way up by pressing the
Power Trim and Tilt “UP” switch.
2. Pull down the Tilt Lever as shown in the illus-
tration.
3. Lower the motor by pressing the Power Trim
and Tilt “DOWN” switch, until the motor is
supported by the Tilt Lever.
4. Continue to operate the Power Trim and Tilt
“DOWN” switch until the trim rods are com-
pletely retracted.
CAUTION
Be sure to retract the trim rams com-
pletely when mooring.
This helps protect the trim rams from
deterioration and corrosion.