manualshive.com logo in svg

Suzuki Burgman Series, Owner'S Manual

Share
Download
Suzuki Burgman Series Owner'S Manual Download Page 36

3-17

NOTE: 
•

The preset interval can be
adjusted after odometer
reaches 600 miles (1000 km).

•

Reset the indicator after initial
engine oil replacement.

•

Reset the indicator after oil
replacement even if the indica-
tor is not displayed.

•

Preset interval change does
not reset the indicator.

OIL LEVEL INDICATOR 

H

The oil level indicator comes on
when the engine oil level is below
the normal operating range.
When the engine oil level indica-
tor comes on, check the engine oil
level through oil level inspection
window described in this owner’s
manual. Add engine oil if the oil
level is below the specified range.

NOTE: The engine oil level in the
crankcase changes while riding.
Quick acceleration, hard braking
and hill climbing will change
engine oil level. This oil level
change can trigger the engine oil
level indicator. The indicator will
also come on it the motorcycle
tips over. These cases are not oil
level indicator malfunction.

Summary of Contents for Burgman Series














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands