background image

2-6

ENGINE COOLANT SOLUTION

Use “SUZUKI SUPER LONG
LIFE COOLANT” or “SUZUKI
LONG LIFE COOLANT”. If
“SUZUKI SUPER LONG LIFE
COOLANT” and “SUZUKI LONG
LIFE COOLANT” are not avail-
able, use a glycol-based anti-
freeze compatible with an
aluminum radiator mixed with dis-
tilled water only at the ratio of
50:50.

NOTE: SUZUKI highly recom-
mends the use of ECSTAR brand
coolant. ECSTAR has been spe-
cially formulated for your SUZUKI
product and contributes to the
desired motorcycle performance
and ideal riding experience.

WARNING

Engine coolant is harmful or
fatal if swallowed or inhaled.
Solution can be poisonous to
animals.

Do not drink antifreeze or cool-
ant solution. If swallowed, do
not induce vomiting. Immedi-
ately contact a poison control
center or a physician. Avoid
inhaling mist or hot vapors; if
inhaled, remove to fresh air. If
coolant gets in eyes, flush eyes
with water and seek medical
attention. Wash thoroughly
after handling. Keep out of the
reach of children and animals.

NOTICE

Spilled engine coolant can
damage the painted surfaces of
your motorcycle.

Be careful not to spill any fluid
when filling the radiator. Wipe
spilled engine coolant up
immediately.

Summary of Contents for Burgman Series














































































































































Reviews: