POWER UNIT 6-41
3. Install two dowel pins.
4. Install crankcase (with the bearing) to cylinder.
5. Apply engine oil lightly to crankcase bolts.
6. Tighten ten bolts to specified torque according to sequence
in figure.
Crankcase bolt:
6 mm 14 N·m (1.4 kg-m, 10.0 lb-ft)
8 mm 25 N·m (2.5 kg-m, 18.0 lb-ft)
TIMING PULLEY
1. Install lower guide
1
.
2. Install key.
3. Install timing pulley
2
and upper guide
3
with direction as
shown.
4. Install lock washer
4
with direction as shown.
NOTE:
• Timing pulley direction:
Position the PUNCH mark to the upper side.
• Belt guide direction:
Install the belt guides with flanges towards outside.
5. Apply THREAD LOCK to timing pulley nut
5
.
99000-32050: THREAD LOCK “1342”
6. Install timing pulley nut
5
.
Tighten timing pulley nut
5
to specified torque using special
tool.
09911-49310: Crankshaft holder
Timing pulley nut: 50 N·m (5.0 kg-m, 36.0 lb-ft)
7
1
2
5
9
3
4
10
6
8
