Suzuki 57100-2884 Series, Installation Instructions Manual, Page: 9 / 108

GENUINE SUZUKI ACCESSORIES
9/17
6. Apply cement to the handle-
bars. Before cement is dried,
spray the degreasing detergent
to the inside of the Grip Heater
(L)
1
and to the handlebars,
then, insert the grip. Slide Grip
Heater (L)
1
onto handlebar
with the lead wire pointing
down.
NOTE: Align the line of Grip
Heater (L)
1
and left
switch line as shown in the
illustration.
Handlebar
Grip Heater (L)
Grip cement
NOTICE
• When the grip is inserted,
do not stop in midway but
insert it at a stroke.
• When inserting it, do not hit
the grip end with a hammer
or twist it forcibly, the grip
heater may be cut off.
• When the grip cannot be
inserted in midway, pull out
the grip by pouring the
degreasing agent into a gap
between the grip heater and
the handlebar. At this time,
do not twist forcibly the
heater wire with a screw-
driver or such similar tool,
the heater wire inside the
grip heater may be cut off.
Grip Heater (L)
Line Line
Line Line
Grip Heater (L) Grip Heater (L)
Left switch Left switch