Suzuki 57100-2884 Series, Installation Instructions Manual, Page: 13 / 108

GENUINE SUZUKI ACCESSORIES
13/17
3. Pass the left and right grip heater lead wires fix them using the
Clamps
6
as shown in the illustration.
NOTE:
•
Be sure there should be no excessive tension nor remarkable slack in
the left and right grip heater lead wire.
• Cut off the excess clamps.
1. Cut off the vehicle clamp.
Clamp the right grip heater lead wire and right handlebar switch lead wire at the front brake
hose union.
2. Pass the right grip heater lead wire and right handlebar switch lead wire through the guide.
3. Cut off the vehicle clamp.
Clamp the left grip heater lead wire, clutch cable and left handlebar switch lead wire.
Face the locked part of clamp downward.
4. Cut off the vehicle clamp.
Clamp the left grip heater lead wire, clutch cable and left handlebar switch lead wire.
5. Clamp the right grip heater lead wire, right handlebar switch lead wire, ignition switch lead
wire and immobilizer antenna lead wire not to give them looseness when turning the
handlebars to the left.
6. Cut off the vehicle clamp.
Clamp the left grip heater lead wire, clutch cable and left handlebar switch lead wire.
Face the locked part of clamp leftward.
7. Right grip heater lead wire
8
. Left grip heater lead wire
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
7 7
8 8