Rev. 2.4
- 12 -
© 2014 Suzo-Happ Group
Bill-to-
Bill™ 300XE
4.1.3.
Bezel Maintenance
Both the bill validating head and the dispenser bezels attached to the door should be now
inspected for any damage caused by a vandalism attempt. If any such excessive damage is found
(such as dent or scratches in the bill entrance or perimeter areas) please contact our technical
support department.
Additionally, spray the compressed air can around the bill entrance (for the bill validating head
bezel) and exit (for the dispenser bezel) areas to remove dust particles and debris. This will
ensure it will not be transferred into the unit during future transactions.