background image

37

meter Use is suitable for weather measurements.
A natural way to alternate between Altimeter/Barometer Use during a hike is to use the
Observer as altimeter when moving and as barometer when camping (no vertical movement
expected). This way you will have more accurate information on both altitude and weather.
Refer to Chapter 3, Altimeter-Barometer Use.

NOTE:

 The modes TIME, ALTI, BARO, and COMP are different from the main operational

USE between Altimeter and Barometer.

What do the LCD segments on the circumference mean?

In the Altimeter mode, one full circle equals 1,000 meters or 1,000 feet; therefore the segments
on the circumference graphically show you the altitude over a full thousand.
In the Barometer mode, one full circle equals 100 hPa or 1 inHg, and the segments indicate
the pressure over a full hundred hPa or over a full inHg.
In the main Compass mode, the segments indicate the North and South (one-lit segment
indicates North, three-lit segment indicate South). If you have set the compass to track a
certain bearing, the segments on the circumference indicate the difference between the
direction in which you want to go and your actual bearing.

ABBREVIATIONS

dEF

default factory setting of pressure sensor, corresponds to standard (1013 mbar or
29,90 inHg) airpressure at sea level

SNR

sensor (used in pressure sensor calibration)

RE

reference altitude

ASC

ascent

dSC

descent

CLR

clear

bEG

begin

Summary of Contents for Observer











































Reviews: