![background image](http://html.mh-extra.com/html/suunto/mosquito/mosquito_user-manual_1408033065.webp)
63
You are able to preset alarms before the actual dive. The user programmable
alarms can be set for maximum depth, dive time and daily time. The alarms
activate when:
•
The preset maximum depth is reached
• continuous beep series for 24 seconds or until any button is pressed.
• the maximum depth blinks as long as the present depth value
exceeds the adjusted value.
•
The preset dive time is reached
• continuous beep series for 24 seconds or until any button is pressed.
• the dive time blinks for one minute, if no button is pressed.
•
The preset alarm time is reached
• the current time is shown.
• continuous beep series for 24 seconds or until any button is pressed.
• the current time blinks for one minute, if no button is pressed.
OXYGEN ALARMS IN EAN MODE
Three double beeps and the backlight activated when:
•
the OLF bar graph reaches 80%. The segments exceeding the 80% limit
start to blink (Fig. 3.23.)
•
the OLF bar graph reaches 100%. All the OLF bar graph segments start
to blink.
The blinking of the segments will stop when the OLF is not loading anymore. At
that point the PO
2
is less than 0.5 bar.
Summary of Contents for Mosquito
