Suunto Mosquito, User Manual, Page: 76 / 122

74
4. While the alarm status [On/OFF] is selected
(blinking), press + or - to change the status. When
the alarm status is On, the depth alarm indicator
( -symbol) in the bottom right corner of the display
indicates that the alarm is on.
5. While the depth digits are selected (blinking), press
+ to increase the value or - to decrease it at intervals
of 0.5 m [1 ft]. Holding down either button starts the
scrolling of the depth value. The range of the depth
is from 3.0 to 99.5 m [10 to 300 ft]. If set to 0, the
alarm is disabled.
6. While the dive time minutes are selected (blinking),
press + or - to change the time. If the time is less than
fi ve (5) minutes, the dive time alarm seconds can
also be set. This feature can be used for freediving
(Fig. 4.11.). If the selected time is over 5 minutes no
seconds are displayed (Fig. 4.12.).
7. After you have set the depth alarm, press the M
button to save the settings and to return to the Setting
Mode [SET].
Fig. 4.12. Dive Time Alarm.
Display when more than 5
minutes dive time left.