Sutter Instrument SmartShutter Lambda SC, Operation Manual

Page: 78 / 90

70
LAMBDA SC OPERATION MANUAL – REV. 1.14C (20190606)
35 mm
SmartShutter
: 0.75 lb (12 oz)
0.34 kg
Electrical:
Input voltage (Mains) 115 V, 60 Hz
230 V, 50 Hz
Mains fuse (rear of cabinet) 5 x 20 mm glass tube,
T1.0A, 250V, IEC 60127-2, Sheet III (such as a
Bussmann GDC-1A or Littelfuse 218 001)
Power cord 10A, 250V, with safety ground plug
Table F-1. Lambda SC controller cables
Connector Type Cable Type Cable Max.
Length
SmartShutter DB-9 male to
DB-9 female Minimum of 26 awg
stranded wire with 500
Volt. Two ferrites are
attached, one at each
end.
10 feet (approx.
3 meters)
Serial DB-9 female to
DB-9 male Connected to metal
faceplates of connectors
on both ends. One ferrite
is attached at one end.
USB A to B Dielectric separation of
circuits. Foil shielding.